A juicer is a wonderful item that gives you the chance to enjoy delicious, cool, and nutritious fruit juice. During hot summer days, it is likely that the juicer will become more and more regular, so you also need to clean it so that it can work properly continuously.
However, most people do not know how to clean a juicer simply and effectively. The assembled and removable parts, the small grooves in the design, the sharp blades all make it difficult for you to clean.
In this article, Arcadiaales.com will share with you details on how to clean a juicer properly. Keep reading!
How to clean a juicer machine?
To clean the juicer, you need the following items:
- A sponge brush
- A dish soap
- A brush
- A toothbrush
Step 1: Turn off the machine.
It will be much easier and faster if you need to clean immediately after each juicing is finished. Because if left for a long time, the residue will stick more firmly and cause yellowing, and of course, cleaning the juicer will become more difficult.
Therefore, as soon as the juice is finished, turn off the machine to perform the cleaning. Unplug the power cord from the power outlet to ensure safe cleaning.
Step 2: Disassemble the juicer.
To quickly clean the juicer, you need to disassemble the machine’s parts from the motor part to clean each specific part for a clean. The first is to remove the fruit pulp drawer from the machine.
Next, remove the safety lock latches on both sides of the machine and remove the machine’s cover. Use a plastic spoon to remove all of the pulp, and make sure you put the pulp in the trash. Because pouring this residue directly into the sink will cause the drain hose to become clogged.
At the same time, proceed to disassemble the filter from the strainer. Then, lift the blender hopper, including the strainer and the machine body’s blender knife, for cleaning.
Step 3: Soak and wash each machine’s part.
When you have finished disassembling the machine components, rinse each of them with warm water so that any residue remaining in the machine parts can be thoroughly cleaned. Then, soak the juicer parts in a pot of hot water diluted with soap.
Next, use a sponge to wipe the inside and outside of the parts gently. In particular, for niches that are too small to be brushed with a sponge, use a small brush with a soft brush tip to scrub.
Step 4: Clean the blender knife and the strainer.
Since there are many small and sharp grooves on the filter and grinder when cleaning the juicer in this section, you should use a brush to clean every corner of the blade; the small grooves can also keep the hands safe.
Dilute lemon juice mixed with water to create a clean mixture, soak for about 20 minutes, then use a cleaning brush to remove the stain.
Step 5: Dry the device.
After cleaning the juicer, take the dryer parts to a dry, well-ventilated place. Then use a soft dry cloth to dry the body part. Take care not to get the body of the body part wet.
To make sure, after being dried, you can disinfect the body and other parts to kill all the bacteria on the machine.
Step 6: Assembly and preservation.
Finally, to finish the cleaning, you must carefully assemble the machine parts and preserve the machine by storing them in a cool place for future use.
Check out our top best juicer here: https://arcadiaales.com/best-juicer/
Tips for cleaning a juicer
No matter which type of machine you choose, how easy it is to clean, but for long-lasting machines, it depends on how you clean it. Here are some small things to keep in mind when cleaning the juicer.
Use mild detergent to clean the machine. Please do not use any harsh abrasives or detergents as they will damage machine parts and are unhealthy.
Clean all parts carefully, absolutely no soap or juice left.
Do not let water get on the machine’s body during cleaning since the machine’s body contains a motor and other microchip parts. If it touches water, it will damage.
It should be careful when cleaning the blades and filters as they are quite sharp.
If you use it several times a day, you can soak it in warm water right after the previous use and rinse with clean water, no need to clean too many times.
Video: How to Clean a Hurom Juicer