What Is The Difference Between Keezer Vs Kegerator? [2021]

What Is The Difference Between Keezer Vs Kegerator

The most annoying thing on earth for each beer enthusiast is opening the fridge and locating that the beer is spoiled. For ages, people are discovering solutions to shop beer for quite a while without getting it sporadically.

Many trials and mistakes have finally found an answer to the problem. But is exactly what you’ve sufficient, or is there a better version of this?

Both forms of beer storage devices, widely known among beer consumers and homebrewers, are referred to as Keezer Vs Kegerator. Even though many do not observe any difference between these, they’re, in fact, different in a variety of ways. Well, they are named differently as they’re different.

Keezer vs Kegerator Difference

Keezer vs Kegerator Difference

In a nutshell, both shop kegs, keep them dispense beer utilizing a tap. In the end, a Keezer has more advantages than a kegerator, as you have more choices for kegs and the number of beer taps you can include. As a house beer brewer, you’ll undoubtedly appreciate that. But a downside is you need to load the kegs 3-1/2 feet off the floor, which may be tricky depending on the dimensions and burden of your keg. A kegerator is simpler to load kegs into, with just needing to lift them around 5 inches.

I have, but I maintain the keezer in the pub in my basement due to all of the advantages I just told you about; my motive is that the keezer is more straightforward than the kegerator.

Let us discuss the options.

Keezer

It’s a modified chest freezer that everyone can make for half of the price of a kegerator. You can custom create this to your style; the choices are infinite.

Essentially, you create a collar from timber and glue it down into the torso. You twist the top lid on the collar and drill a few holes to your tap lines. To control the temperature so that it’s not freezing, I utilize a plugin and play with the thermostat. This uses a temperature probe, which sits at the keezer and turns off and on to whatever temperature you set it to.

The price for my first Keezer was approximately $200. I left it in my flat, working with a hand saw and a drill for the holes. I truly mean it when I say anybody can get it done.

How many kegs can it match?

This is based upon their chest freezer; they create small, medium, and big. You can put eight or even more corny kegs, the most significant or two, in the minimum.

The one I have is little, just five cubic feet. I have had 3-pound barrels inside at a time. The residual distance I used for bottles and cans, along with a few storages for meals.

A 1/2 barrel isn’t likely to fit in the more compact chest freezer, but it could be more extensive. The main reason that this probably will not work is they are approximately 160 lbs; despite somebody helping, it is tough to install.

Customize it the way you need It

Yes, even a Keezer is a tiny bit of effort, but trust me, it’s well worth it.

I’ve seen some fantastic keezers being constructed, which is one of my favorite things about these. The fundamental part is that the collar, out there, you can do anything you wish into your system.

Some Fantastic keezers I have seen have done a number of them:

  • Construct a tower faucet system
  • Utilize Barn timber to wrap the entire body
  • Insert chalkboard paint and upgrade your beer listing
  • Install your electronic thermostat onto the collar (looks professional today)
  • Decorate it with your favorite sport group
  • Insert LED lights
  • It is infinite, and that’s what creates a Keezer special to you.

Read also: Best Beer Glasses 2021: Top Brands Review

What type of tools and abilities do I need?

I’m not a handyman whatsoever, but I assembled it in my flat using a hand saw and a drill to tell you how simple this was.

The very first thing I did was removed the lid, super simple. I then assess the inside of the eyebrow; I then went a bought a 4X8 plank. Measured it made the cuts.

I drilled two screws onto every one of the sides, a total of 8 screws.

I then used construction caulk and glued the collar to the freezer. I place the lid onto the top with a little fat to hold it down for 2 hours. I then screwed the lid into the trunk, and it held up perfectly! I had been impressed by myself, but that I was not done yet. I needed to create the holes in the tap lines.

I utilized a 7/8″ spade drill bits for your shank complete, a great snug fit.

Additionally, I made the same size hole to your Co2 lineup on the side; my strategy was to some man shank on the two ends to create that function.

Pros

  • Affordable -$175-$400 (You can always find a used one on craigslist for super cheap)
  • Customizable – (Make it basic or make it awesome)
  • Keezers Are quite – Barely noticeable.
  • More Beer – You can add different kinds of beer, depending on the size of the freezer
  • Electricity – Yearly cost is under $75 to run; keep it full of beer, and it could be lower!
  • Not Heavy – Compared to a kegerator, chest freezers are really lightweight.
  • Save Money – Buying in kegs is cheaper than by the can and tastes better.

Cons

  • Overall, the main con is that it’s a chest freezer, so you need to modify it, but it isn’t difficult.
  • You need to cut some wood and drill some holes (Skill level is minimal)
  • It would help if you modified the thermostat; that is an easy
  • Loading beer over the top, kegs can be heavy and hard to move on your own
  • The extras needed – Tap lines, Faucet, Co2 tank, regulator, distributor) That could be an extra $100

Kegerator

A kegerator is a commercial beer heating system with a built-in faucet tower and drains spout. You find them in the dark and more prevalent in stainless steel. They look very sharp.

You can find a one-tap, three, two, and a 4 line system for the home user. The tap lines you include do restrict how big the kegs are going right into it. Meaning, if I have the one-tap line, I might also use 1/2 barrels since the most significant keg in the refrigerator. If I wish to update two faucets up, I’ll be utilizing 1/4 or 1/6 sized kegs.

Kegerators are created for cooling and dispersing the atmosphere through the tower, plus they do a fantastic job of it.

The kegs are simpler to load because they’re nearly ground level.

In general, a kegerator is an excellent way to distribute beer. All these are a little investment, but satisfying none the less. You can view our top 9 selections over here.

Pros

  • Ready to serve beer almost – most new kegerators come with everything you need, gas lines, coupler, etc. But they won’t come with Co2 gas.
  • Super Cold – Keeps beer real cold.
  • Drain – Over pouring will catch in the drain, but that drain will need a bucket at the bottom.
  • Easy Load – Get kegs in with less lifting.
  • Pour level – I like that the tap and cabinet are comfortable to serve, no bending over or reaching up high.

Cons

  • Heavy – Make sure casters come with
  • Loud – The compressor is always going, so it creates more noise
  • $$$ – These can range from $500 to $3500
  • No Gas – You have to buy Co2 as well.

Possessing a kegerator was terrific; I stand from the pros and cons; my main gripe is the sound. It is not dreadful, but I did detect having to speak a little louder when I had people over.

I’d recommend you to the home bar or guy cave.

Read also: Best Kegerator 2021: Top Brands Review

Electricity

Both operate in your regular 120-volt plugin. That’s fine, no additional wiring required, you could plug in, and it’ll start. But that uses more energy.

To conduct a kegerator for a full year, it’s estimated to cost $125 based on kegerators.com approximately. However, I think that it’s probably more like $200.

A keezer will be different because of how it’s constructed. It is essentially a massive box with the underside and all borders becoming chilly versus a condenser blowing cold air. But also, it’s been converted for a fridge, so it is turning more often. But as far as cost to operate per year, it is about $5-8 per month, so only under $100.

However, a pretty reasonable cost to have draft beer on your residence.

Read also: https://thompsonislandbrewing.com/blog/how-to-store-beer

Conclusion

So bottom line, I managed to save a couple of bucks by buying a brand-new Kegerator over constructing my Keezer.

I might have attracted the Keezer price down even more by visiting more economical taps or forgoing the stainless alternative. That is always an option if you want to save a couple of bucks.

The tipping point for me personally was that the time stored in being able to host my beer. Together with the Keezer construct, I’d have had to obtain time on the weekends or after work to set the damn thing together. While that did seem attractive, it turned out to be a great deal simpler unboxing that the Kegerator and hammering the item it.

Reach out in the comments below if you have any additional questions. Happy to attempt to answer them.

Video: How to Build a Keezer or Kegerator for Serving Beer at Home

Leave a Reply

Your email address will not be published. Required fields are marked *